Deutsch

Deutsch

• Contact
• Imprint

Schedule: 7 March – 9 March 2011
Exam: 21 March – 23 March 2011
2nd exam (optional): 23 March – 25 March 2011

Schedule: 6 June – 8 June 2011
Exam: 20 June – 22 June 2011

Schedule: 5 December – 7 December 2011
Exam: 20 December – 22 December 2011

Description:
The advanced course further expands on the knowledge and skills acquired in the basic course. By learning about the nature of product-specific errors, creation of testing instructions and evaluation of test results, the participant achieves level 2 certification in visual inspection following a successful exam. The course ends with an exam and certification according to ÖNORM EN 473.

[» more]

Schedule: 12 January – 14 January 2011
1st exam: 17 January – 18 January 2011

Schedule: 26 January – 28 January 2011
1st exam: 7 February – 8 February 2011
2nd exam (optional): 9 February – 10 February 2011

Schedule: 6 April – 8 April 2011
1st exam: 18 April – 19 April 2011

Schedule: 5 October – 7 October 2011
1st exam: 17 October – 18 October 2011
2nd exam (optional): 19 October – 20 October 2011

Description:
Penetrant testing is a highly sensitive, non-destructive testing procedure for identifying surface flaws (such as cracks, pores, cavities or fusing flaws) on non-porous parts, such as metals, plastics, glazed ceramics and the like. Among other concepts, the theoretical portion addresses the physical and technical differences between dye penetrant testing and fluorescent penetrant testing as well as flaw inspection according to EN and AMSE regulations. The practical portion of the training covers the testing of parts with natural flaws as well as the handling of testing problems that arise. The course ends with an exam and certification according to ÖNORM EN 473.

[» more]

Schedule: 2 December – 6 December 2010
Exam: 14 December – 16 December 2010

Schedule: 10 March – 14 March 2011
Exam: 21 March – 23 March 2011
2nd exam (optional): 23 March – 25 March 2011

Schedule: 9 June – 14 June 2011
Exam: 20 June – 22 June 2011

Schedule: 12 December – 14 December 2011
Exam: 20 December – 22 December 2011

Description:
In addition to expanding on the foundation from level 1, the course contents of level 2 include the evaluation and logging of the displayed information as well as the creation of testing instructions. The course ends with an exam and certification according to ÖNORM EN 473.

[» more]

Schedule: 31 January – 4 February 2011
1st exam: 7 February – 8 February 2011
2nd exam (optional): 9 February – 10 February 2011

Schedule: 11 April – 15 April 2011
1st exam: 18 April – 19 April 2011

Schedule: 10 October – 14 October 2011
1st exam: 17 October – 18 October 2011
2nd exam (optional): 19 October – 20 October 2011

Description:
Magnetic particle testing serves for detecting material separations at the surface or near the surface of ferromagnetic parts (iron, cobalt, nickel, ferromagnetic steels). The course includes the physical and technical principles of the procedure, procedure limits, testing problems, safety precautions, flaw inspection according to EN and ASME regulations, magnetization methods as well as the use of testing systems and devices in both theory and practice. The course contents are taught to the participants through lectures and practical exercises. The course ends with an exam and certification according to ÖNORM EN 473.

[» more]

Schedule: 7 December – 13 December 2010
Exam: 14 December – 16 December 2010

Schedule: 14 March – 18 March 2011
Exam: 21 March – 23 March 2011
2nd exam (optional): 23 March – 25 March 2011

Schedule: 14 June – 17 June 2011
Exam: 20 June – 22 June 2011
Schedule: 14 December – 19 December 2011

Exam: 20 December – 22 December 2011

Description:
Building upon the contents of the basic course, level 2 goes into greater detail on the testing techniques. Another key area is the creation and evaluation of test results. The course ends with an exam and certification according to ÖNORM EN 473.

[» more]

Schedule: 4 July – 15 July 2011
Exam: 18 July – 19 July 2011
2nd exam (optional): 20 July – 11 July 2011

Description:
Visual inspection is a suitable non-destructive testing procedure for identifying flaws inside of parts. This seminar presents the physical and technical principles of the procedure and teaches the special safety precautions and testing problems. In addition to theoretical knowledge, the course also covers practical skills in flaw inspection according to EN and ASME regulations, radiation protection and inspection with X-rays and gamma rays. The course ends with an exam and certification according to ÖNORM EN 473.

[» more]

Schedule: 5 September – 21 September 2011
Exam: 26 September – 27 September 2011
2nd exam (optional): 28 September – 29 September 2011

Description:
The advanced course further expands on the knowledge and skills acquired in the basic course. The focus is placed on the evaluation of radiographic images as well as creating reports and the evaluation and creation of testing procedures. The course ends with an exam and certification according to ÖNORM EN 473.

[» more]

Schedule: 7 November – 18 November 2011
Practical portion: 21 November – 23 November 2011
1st exam: 28 November – 29 November 2011
2nd exam (optional): 30 November – 1 December 2011

Description:
Ultrasound testing is a volumetric procedure for identifying material flaws by subjecting the parts to ultrasound waves from a test probe. The theoretical training includes an introduction to the testing methods as well as the physical and technical principles, standards and regulations and testing problems that arise. This knowledge is put into practice in hands-on exercises involving flaw inspection according to EN and ASME regulations on parts with artificial and natural flaws. The course ends with an exam and certification according to ÖNORM EN 473.

[» more]

Schedule: 2 May – 20 May 2011
Practical portion: 23 May – 25 May 2011
Exam: 30 May – 31 May 2011

Description:
The advanced course further expands on the knowledge and skills acquired in the basic course. In addition, the flaw echoes are interpreted and evaluated on the basis of international regulations. After completing this seminar, the participant will be capable of independently creating testing instructions. The course ends with an exam and certification according to ÖNORM EN 473.

[» more]

Schedule: 20 April – 21 April 2011
Exam: 22 April 2011

Schedule: 22 September – 23 September 2011
Exam: 26 September 2011

Description:
10 years after completing the first exam in a non-destructive testing procedure, ÖNORM EN 473 requires the recertification in a corresponding procedure. The offered preparatory course reviews the physical principles of the procedure and the safety precautions. Practical exercises involve flaw inspection according to EN and ASME standards as well as the inspection of natural parts and creating a set of testing instructions according to standards (level 2 only).

[» more]